(1) Structures authorized by a Type C4 permit shall be placed a minimum of 10 feet from the edge of the traveled way and shall not block or hinder the sight distance for driveway or intersections. The area between the traveled way and the structure shall be a gravel or paved shoulder and extend full shoulder width at least 20 feet on each side of the structure with a 10:1 taper back to the edge of the traveled lane. The location must have an adequate stopping sight distance for approaching vehicles.

(2) Structures authorized by a Type C4 permit must be emptied regularly to prevent overflow and possible rodent infestation.

(3) A number will be assigned to each approved application for a Type C4 permit. This number will be attached permanently to the recycling structure and will be used to identify the owner of the structure to authorized departments for contacting them to clean up the area or for other problems.

(4) At the engineer’s discretion, a single Type C4 permit may be issued for multiple recycle box structures. Each recycle box location must be listed on the permit. If the permittee desires to move a recycle box to a different location, the permittee must submit a request for approval of the new location to the department at least 48 hours prior to the intended move.

(5) Failure of the permittee to comply with all requirements for such structures may result in the suspension or revocation of the Type C4 permit. (Added by Ord. 85-051 § 3, July 3, 1985; Amended by Ord. 96-028 § 38, June 12, 1996, Eff date June 29, 1996; Amended by Amended Ord. 12-001, Feb. 15, 2012, Eff date Feb. 26, 2012; Amended by Ord. 13-051, July 31, 2013, Eff date Aug. 12, 2013).